Query：
学者姓名：宋剑斌
Refining：
Year
Type
Indexed by
Source
Complex
Co-Author
Language
Clean All
Abstract ：
In order to improve the interfacial interaction between poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate) (PETG) and bamboo flour, the surface of bamboo flour (BF) was modified with methyl methacrylate (MMA) using the electron transfer (AGET) atom transfer radical polymerization (ATRP) method. The grafted BF was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis. The MMA groups had been successfully grafted onto the BF surface and the contact angle of the grafted BF was as high as 130 degrees. The maximum flexural strength was determined to be 72 MPa for the composite containing 20 wt% modified BF, which was higher than that of the composite containing 20 wt% original BF (62 MPa). Also, the decrease in loss factor indicated that the grafting modification improved the compatibility between PETG and BF, and this conclusion was also confirmed by SEM. The results have great practical significance for the application of PETG/BF composites.
Keyword ：
AGET ATRP AGET ATRP bamboo flour bamboo flour mechanical properties mechanical properties PETG PETG
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yu, Fangbing , Wu, Qiuning , Chen, Jingbing et al. BAMBOO FLOUR/PETG COMPOSITES: COMPATIBILIZING EFFECT OF POLY(METHYL METHACRYLATE) GRAFTED ONTO BAMBOO FLOUR [J]. | CELLULOSE CHEMISTRY AND TECHNOLOGY , 2019 , 53 (1-2) : 145-154 . |
| MLA | Yu, Fangbing et al. "BAMBOO FLOUR/PETG COMPOSITES: COMPATIBILIZING EFFECT OF POLY(METHYL METHACRYLATE) GRAFTED ONTO BAMBOO FLOUR" . | CELLULOSE CHEMISTRY AND TECHNOLOGY 53 . 1-2 (2019) : 145-154 . |
| APA | Yu, Fangbing , Wu, Qiuning , Chen, Jingbing , Song, Jianbin , Yang, Wenbin . BAMBOO FLOUR/PETG COMPOSITES: COMPATIBILIZING EFFECT OF POLY(METHYL METHACRYLATE) GRAFTED ONTO BAMBOO FLOUR . | CELLULOSE CHEMISTRY AND TECHNOLOGY , 2019 , 53 (1-2) , 145-154 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
In order to improve the interfacial interaction between poly(ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate) (PETG) and bamboo flour, the surface of bamboo flour (BF) was modified with methyl methacrylate (MMA) using the electron transfer (AGET) atom transfer radical polymerization (ATRP) method. The grafted BF was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis. The MMA groups had been successfully grafted onto the BF surface and the contact angle of the grafted BF was as high as 130 degrees. The maximum flexural strength was determined to be 72 MPa for the composite containing 20 wt% modified BF, which was higher than that of the composite containing 20 wt% original BF (62 MPa). Also, the decrease in loss factor indicated that the grafting modification improved the compatibility between PETG and BF, and this conclusion was also confirmed by SEM. The results have great practical significance for the application of PETG/BF composites.
Keyword ：
AGET ATRP AGET ATRP bamboo flour bamboo flour mechanical properties mechanical properties PETG PETG
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Yu, Fangbing , Wu, Qiuning , Chen, Jingbing et al. BAMBOO FLOUR/PETG COMPOSITES: COMPATIBILIZING EFFECT OF POLY(METHYL METHACRYLATE) GRAFTED ONTO BAMBOO FLOUR [J]. | Cellulose Chemistry and Technology: International Journal for Physics, Chemistry and Technology of Cellulose and Lignin , 2019 , 53 (1/2) : 145-154 . |
| MLA | Yu, Fangbing et al. "BAMBOO FLOUR/PETG COMPOSITES: COMPATIBILIZING EFFECT OF POLY(METHYL METHACRYLATE) GRAFTED ONTO BAMBOO FLOUR" . | Cellulose Chemistry and Technology: International Journal for Physics, Chemistry and Technology of Cellulose and Lignin 53 . 1/2 (2019) : 145-154 . |
| APA | Yu, Fangbing , Wu, Qiuning , Chen, Jingbing , Song, Jianbin , Yang, Wenbin . BAMBOO FLOUR/PETG COMPOSITES: COMPATIBILIZING EFFECT OF POLY(METHYL METHACRYLATE) GRAFTED ONTO BAMBOO FLOUR . | Cellulose Chemistry and Technology: International Journal for Physics, Chemistry and Technology of Cellulose and Lignin , 2019 , 53 (1/2) , 145-154 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
To enhance the durability of hemp twine (HT) in cement composite, this study focuses on a holistic approach by investigating the effects of hybrid treatments on the HT. The treatments involve alkalization, treatment with alkaline copper quaternary type D after which the treated HT were grouped into three and the three groups were coated with paraffin wax, epoxy acrylate and waste engine oil respectively, thereby generating three hybrid treatments (hybrid 1, hybrid 2 and hybrid 3). The effects of the treatments on the properties of the HT were investigated using X-ray diffractometer, thermogravimetry analysis, scanning electron microscopy and micro force testing machine and results obtained reveal that the impact of the treatments on the HT is positive. Moreover, the effects of the treatments on water absorption capacity and resistance to micro-organism attack were also investigated and interesting results were obtained.
Keyword ：
Cement composite Cement composite Durability Durability Fiber Fiber Hemp Hemp Hybrid treatment Hybrid treatment
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Lawan, Ibrahim , Qiang, Li , Zhou, Weiming et al. Modifications of hemp twine for use as a fiber in cement composite: effects of hybrid treatments [J]. | CELLULOSE , 2018 , 25 (3) : 2009-2020 . |
| MLA | Lawan, Ibrahim et al. "Modifications of hemp twine for use as a fiber in cement composite: effects of hybrid treatments" . | CELLULOSE 25 . 3 (2018) : 2009-2020 . |
| APA | Lawan, Ibrahim , Qiang, Li , Zhou, Weiming , Yi, Jia , Song, Jianbin , Zhang, Mingxin et al. Modifications of hemp twine for use as a fiber in cement composite: effects of hybrid treatments . | CELLULOSE , 2018 , 25 (3) , 2009-2020 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Polylactic acid (PLA)/pearlescent pigments (PEPs) composites were fabricated by melt blending method and their properties were studied using a rotational rheometry, field emission scanning electron microscopy (FESEM), differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). Because PEP could disperse uniformly in PLA matrix and would form PEP networks, there were improvements made in the flexural strength, tensile strength and impact strength of PLA composites. Interestingly, the viscosity of PLA composites reduced significantly as compared with neat PLA, indicating an improvement in processing properties. The rheological tests confirmed that the storage modulus of PLA composites decreased as PEP content increased at a given frequency. Also, there was a plateau at low frequency range, which was a sign of PEP networks formation. The DMA tests showed that the storage modulus of PLA composite increased with PEP content, suggesting the enhancement of rigidity. According to the XRD results, no change was observed in the crystal structure of PLA in the presence of PEP. The addition of PEP did not change melting temperature, but the glass transition temperature increased a little, and the cold crystallization temperature of PLA decreased largely. The DSC results also showed that nucleation ability of PLA was enhanced by addition of PEP at low cooling rates, but the whole crystallization process of PLA in composite was inhibited at higher cooling rates. This conclusion was also confirmed by the results of crystallization kinetics.
Keyword ：
Crystallization Crystallization Mechanical property Mechanical property Pearlescent pigments Pearlescent pigments Polylactic acid Polylactic acid Viscosity Viscosity
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Song, Jianbin , Zhang, Huiliang . Influence of pearlescent pigments on mechanical properties and crystallization behavior of polylactic acid [J]. | IRANIAN POLYMER JOURNAL , 2018 , 27 (2) : 105-114 . |
| MLA | Song, Jianbin et al. "Influence of pearlescent pigments on mechanical properties and crystallization behavior of polylactic acid" . | IRANIAN POLYMER JOURNAL 27 . 2 (2018) : 105-114 . |
| APA | Song, Jianbin , Zhang, Huiliang . Influence of pearlescent pigments on mechanical properties and crystallization behavior of polylactic acid . | IRANIAN POLYMER JOURNAL , 2018 , 27 (2) , 105-114 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
为研究天然石墨和合成石墨在不同竹炭质量分数条件下复合材料的电磁屏蔽效果,制备屏蔽效能优异的竹炭/石墨/环氧树脂电磁屏蔽复合材料,在两种石墨中分别加入不同质量分数的竹炭,通过模压固化成型制成竹炭/石墨电磁屏蔽复合材料,并对其进行力学性能、动态热机械性能、电阻率性能和电磁屏蔽效能测试及扫描电子显微镜分析。结果表明:随着竹炭质量分数的增加,逐步形成竹炭-石墨网状结构,两种复合材料的玻璃化转变温度均上升;电阻率均降低;30~1 500 MHz频率下电磁屏蔽效能均增大,竹炭质量分数为40%时,合成石墨复合材料电磁屏蔽效能最大,约为30 d B;但由于填料的团聚作用,两种复合材料的弯曲模量下降。扫描电子显微镜分析表明,合成石墨复合材料的界面结合力更好。综合分析可知,当竹炭质量分数为30%时,合成石墨复合材料的力学性能较好;竹炭质量分数增加,石墨复合材料的电磁屏蔽效能增大。
Keyword ：
弯曲性能 弯曲性能 电磁屏蔽复合材料 电磁屏蔽复合材料 电磁屏蔽效能 电磁屏蔽效能 电阻率 电阻率 竹炭 竹炭
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 杨文斌 , 文月琴 , 宋剑斌 . 竹炭/石墨/环氧树脂电磁屏蔽复合材料性能研究 [J]. | 林业工程学报 , 2018 , 3 (01) : 65-70 . |
| MLA | 杨文斌 et al. "竹炭/石墨/环氧树脂电磁屏蔽复合材料性能研究" . | 林业工程学报 3 . 01 (2018) : 65-70 . |
| APA | 杨文斌 , 文月琴 , 宋剑斌 . 竹炭/石墨/环氧树脂电磁屏蔽复合材料性能研究 . | 林业工程学报 , 2018 , 3 (01) , 65-70 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
为了充分利用木质素,扩大其在复合材料的应用范围,采用木质素、苯酚和甲醛合成了木质素基酚醛树脂。以天然石墨和碳纤维做导电填料,采用模压工艺制备燃料电池用双极板材料。对复合材料的密度、弯曲性能、动态力学性能和电导率进行表征分析。结果表明,当天然石墨逐步被碳纤维取代后,木质素基复合材料的密度随着碳纤维含量的增加而逐渐下降;弯曲强度则一直增加,但是弯曲模量在碳纤维达到30%时达到最大值,之后开始下降。动态力学性能实验表明,材料的储能模量和玻璃化转变温度随着碳纤含量增加而增加,并在30%碳纤维时达到最高值。复合材料的电导率随着碳纤维含量增加而增加,最大达到500 S/cm,之后复合材料的电导率开始下降。研究结果证明,含有30%碳纤维和30%天然石墨的木质素基复合材料具有较好的综合性能:密度为1.16 g/cm~3,弯曲强度和弯曲模量分别为52.7 MPa和10.7 GPa,电导率500 S/cm。
Keyword ：
动态力学性能 动态力学性能 双极板 双极板 木质素 木质素 电导率 电导率 酚醛树脂 酚醛树脂
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 宋剑斌 , 周为明 , 张明昕 et al. 木质素基燃料电池双极板的制备及性能研究 [J]. | 塑料工业 , 2018 , 46 (03) : 147-150,154 . |
| MLA | 宋剑斌 et al. "木质素基燃料电池双极板的制备及性能研究" . | 塑料工业 46 . 03 (2018) : 147-150,154 . |
| APA | 宋剑斌 , 周为明 , 张明昕 , 袁占辉 . 木质素基燃料电池双极板的制备及性能研究 . | 塑料工业 , 2018 , 46 (03) , 147-150,154 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
本发明公开了一种酸碱两步催化法组装成致密薄膜包覆片状铝粉的方法，通过该方法表面改性后的铝粉使其能够在较高温度和较低pH条件下能稳定存在。该方法主要通过不同催化剂催化正硅酸乙酯(TEOS)使其水解缩合，得到不同结构的二氧化硅，这两种二氧化硅通过自组装，形成致密的二氧化硅薄膜，使其包覆在片状铝粉表面。通过称量一定量的铝粉在pH=1.5，温度为80℃的水溶液条件下，测量其析氢量的多少，来衡量其包覆性能的好坏。本发明所包覆的铝粉能满足安全运输要求，用于含酸碱溶液的涂料的添加成分，用于装饰品的表面喷涂保护，而且包覆后的铝粉保持其良好的光泽度，能用于汽车涂料，增强汽车表面的美观性。
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | 袁占辉 , 张其兴 , 周为明 et al. 一种酸碱两步催化法组装成致密薄膜包覆片状铝粉的方法 : CN201810337632.5[P]. | 2018-04-16 . |
| MLA | 袁占辉 et al. "一种酸碱两步催化法组装成致密薄膜包覆片状铝粉的方法" : CN201810337632.5. | 2018-04-16 . |
| APA | 袁占辉 , 张其兴 , 周为明 , 胡海滨 , 江一帆 , 宋剑斌 et al. 一种酸碱两步催化法组装成致密薄膜包覆片状铝粉的方法 : CN201810337632.5. | 2018-04-16 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
This study was aimed at preparing electromagnetic interference ( EMI) shielding materials based on carbon black ( CB), carbon fiber ( CF), bamboo charcoal ( BC), and epoxy resin. The effects of adding bamboo charcoal on the mechanical properties and electrical resistivity of epoxy composites were studied. Scanning electron microscopic ( SEM) analysis, electrical resistivity, and electromagnetic interference ( EMI) shielding effectiveness were also investigated. The composites were prepared at 120 degrees C by the curing-molding method through blending the fillers in epoxy resin. The results revealed that the BC/CB and BC/CF composites had perfect conductive network structure and resulted in better dynamic thermal mechanical properties. The electrical resistivity declined with the increase of bamboo charcoal contents; consequently, the EMI shielding effectiveness improved gradually. The lowest electrical resistivity, down to 0.071 Omega.m, corresponded to the best EMI shielding effectiveness of BC/CF composites, which could be above 60 dB over a frequency range of 30 MHz to 1500 MHz while the carbon fiber content was at 40 wt.%.
Keyword ：
Bamboo charcoal Bamboo charcoal Carbon black Carbon black Carbon fiber Carbon fiber EMI shielding effectiveness EMI shielding effectiveness Epoxy Epoxy
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Wen, Yueqin , Song, Jianbin , Chen, Jingbing et al. Synergistic Conductivity and Electromagnetic Interference Shielding Effectiveness of Epoxy/Carbon Fiber and Epoxy/Carbon Black Composites via Mixing with Bamboo Charcoal [J]. | BIORESOURCES , 2017 , 12 (1) : 1288-1299 . |
| MLA | Wen, Yueqin et al. "Synergistic Conductivity and Electromagnetic Interference Shielding Effectiveness of Epoxy/Carbon Fiber and Epoxy/Carbon Black Composites via Mixing with Bamboo Charcoal" . | BIORESOURCES 12 . 1 (2017) : 1288-1299 . |
| APA | Wen, Yueqin , Song, Jianbin , Chen, Jingbing , Sun, Yingying , Yang, Wenbin . Synergistic Conductivity and Electromagnetic Interference Shielding Effectiveness of Epoxy/Carbon Fiber and Epoxy/Carbon Black Composites via Mixing with Bamboo Charcoal . | BIORESOURCES , 2017 , 12 (1) , 1288-1299 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Carbon fiber (CF) paper is an excellent material for use in electric heating wood floors systems. In this paper, a CF paper-based electric heating wood floor was prepared using a hot pressure process. The thermal aging properties and electric heating behaviors of the CF paper-based wood floors were studied using scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), and a temperature recorder. The CF paper exhibited excellent thermal stability, and its structure and morphology did not show any changes after exposure to 110 degrees C for 15 h. The surface temperature of the CF paper increased as input voltage increased. The positioning of CF paper in the middle of wood floors was believed to be the optimum design for electric heating wood floors. Theoretical calculations showed that the CF paper based electric heating wood floors (1.1 m(2)) could increase room (3 m x 4 m x 2.6 m) temperature by 12.9 degrees C.
Keyword ：
Carbon fiber paper Carbon fiber paper Electric heating wood floor Electric heating wood floor SEM SEM XRD XRD
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Song, Jianbin , Hu, Haibin , Zhang, Mingxin et al. Thermal Aging Properties and Electric Heating Behaviors of Carbon Fiber Paper-based Electric Heating Wood Floors [J]. | BIORESOURCES , 2017 , 12 (4) : 9466-9475 . |
| MLA | Song, Jianbin et al. "Thermal Aging Properties and Electric Heating Behaviors of Carbon Fiber Paper-based Electric Heating Wood Floors" . | BIORESOURCES 12 . 4 (2017) : 9466-9475 . |
| APA | Song, Jianbin , Hu, Haibin , Zhang, Mingxin , Huang, Biao , Yuan, Zhanhui . Thermal Aging Properties and Electric Heating Behaviors of Carbon Fiber Paper-based Electric Heating Wood Floors . | BIORESOURCES , 2017 , 12 (4) , 9466-9475 . |
| Export to | NoteExpress RIS BibTex |
Version ：
Abstract ：
Acrylonitrile-styrene-acrylate/natural graphite/carbon nanofiber composites (ASA/NG/CNF) were prepared using a melting blending method. The effects of CNFs on the morphology, rheological properties, dynamical mechanical properties, electrical resistivity, and electromagnetic interference shielding effectiveness (EMI SE) were studied using a scanning electron microscope, a rotational rheometer, and dynamic mechanical analysis (DMA). The addition of CNFs changed the oriented and laminated structure of the ASA/NG composite. The flexural strength of the ASA composite reached a maximum at 6% CNF, and then it began to decrease. The addition of CNFs did not alter the glass-transition temperature of ASA, but it largely increased the storage modulus of the composite in DMA tests. In the rheological measurements, the complex viscosity and storage modulus of the composite increased as CNF content increased, and the resistance to creep of the composites was significantly increased by the addition of CNFs. The electrical resistivity of the ASA composites decreased from 49.8 cm to 2.3 cm as the CNF content was increased from 0 to 12%. At the same time, the EMI properties of the composites rose from 15 dB to 30 dB in the frequency range 30-1500 MHz. (c) 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45455.
Keyword ：
ASA ASA CNF CNF EMI EMI graphite graphite SE SE
Cite：
Copy from the list or Export to your reference management。
| GB/T 7714 | Song, Jianbin , Zhang, Qixing , Hu, Haibin et al. Electromagnetic interference properties of carbon nanofiber-reinforced acrylonitrile-styrene-acrylate/natural graphite composites [J]. | JOURNAL OF APPLIED POLYMER SCIENCE , 2017 , 134 (43) . |
| MLA | Song, Jianbin et al. "Electromagnetic interference properties of carbon nanofiber-reinforced acrylonitrile-styrene-acrylate/natural graphite composites" . | JOURNAL OF APPLIED POLYMER SCIENCE 134 . 43 (2017) . |
| APA | Song, Jianbin , Zhang, Qixing , Hu, Haibin , Jiang, Yifan , Zhang, Huiliang , Zhang, Mingxin et al. Electromagnetic interference properties of carbon nanofiber-reinforced acrylonitrile-styrene-acrylate/natural graphite composites . | JOURNAL OF APPLIED POLYMER SCIENCE , 2017 , 134 (43) . |
| Export to | NoteExpress RIS BibTex |
Version ：
Export
| Results： |
Selected to |
| Format： |
